Full core dump in HP-UX 10.20

[Kasman]

Hello,

I am trying to run an application on HP-UX 10.20 , when I execute the command it will give me a core dump file. I sent the core file to the vendor and they mentioned that the core file was not a full core memory dump.

How do I set the HP-UX to perform a full memory core dump ?

Thanks
Kasman

[Michael Tully]

How did you create the core file?

Here is a similar discussion:
http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xde78ef70e827d711abdc0090277a778c,00.html

BTW a full memory dump is created via system panic. If your trying to restrict to your application, the above posting contains some hints.

[KCS_1]

Hi,Kasman

Have a look at this under url that explain how to configure/set core dump space on hp-ux.


http://www1.itrc.hp.com/service/iv/docDisplay.do?docId=/DE_SW_UX_swrec_EN_01_E/Dump.pdf


have a good day!

[Steven E. Protter]

Here are instructions on how to analyze a core dump file.

attached in html format. HP will be able to provide you information on the problem if its a standard core dump file.


SEP