Gcc Compiler Install

[Oktay Tasdemir]

Hi,

I would like to install gcc compiler on HP-UX 11.00, could anyone tell me if it is supported and shipped by HP or would I have to go to GNU and install it from there?

[Michael Tully]

Try here:

http://hpux.connect.org.uk/hppd/hpux/Gnu/gcc-3.2/

You will need the dependancies as well. Check the page, it stipulates what.

[Steven E. Protter]

Don't forget the pre-requisites.

You are better off with SD-UX depots versus source code, but it can be done either way.

You might want to use swcopy to create a patch depot out of all the dependencies and then you can do the install with one command line.

swinstall -s /tmp/patch.depot \*

SEP

[KCS_1 · Accepted solution]

hi,

you can download the GCC from this

http://h21007.www2.hp.com/dspp/tech/tech_TechSoftwareDetailPage_IDX/1,1703,547,00.html


have a good day.

[Oktay Tasdemir]

Thanks all,

Patrick's suggested website was the easiest.

[Balaji N]

now that ur problem is solved, how abt assigning points.
-balaji

[Oktay Tasdemir]

Sorry forgot about the points, one other request I would also like to install PERL5 and would like to install it as per Patricks solution i.e swinstall. I have checked the website
http://h21007.www2.hp.com/dspp/tech/tech_TechSoftwareDetailPage_IDX/1,1703,547,00.html
but could not find any perl binaries/source. What is the best was to install perl as I came across some doco suggesting www.perl.com is not recommended.

Many thanks

[Balaji N]

thanks oktay.

AFAIK, perl by default comes with the HP UX application CD's. you should be able to find them there. if not, use porting archive. link below.

http://hpux.connect.org.uk/hppd/hpux/Languages/perl-5.8.0/


hth
-balaji

[KCS_1]

Thanks for assigning high point!

anyway,,have a look at this url.


http://www.software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/displayProductInfo.pl?productNumber=PERL


http://h21007.www2.hp.com/dspp/dld/dld_DownloadsListingPage_IDX/1,2381,11122,00.html


have a good day!

[H.Merijn Brand (procura]

perl-5.8.0 plus lots of nice packages prebuilt available for 11.00 on my ITRC site. Also available there is the gcc-3 compiler I to build it with and binutils that you need with it, and a short description of how to use the gcc to rebuild it from source to have it adjust itself to your system.

https://www.beepz.com/personal/merijn/ or http://www.cmve.net/~merijn/

Enjoy, have FUN! H.Merijn