getkinfo: Unable to read the kernel file "/stand/vmunix"

[Omar Al-Saiari]

hi

We have b2600 with 10.20 s700 after install token ring card and the driver & required patches to the system.
SAM gives us the following error message if we want to modify the kernel parameter

getkinfo: Syntax error in system file.
Incorrect driver/subsystem statement(s): pcitr

Each driver/subsystem shown above is not valid for one of the following reasons:
The driver (including any aliases) is not recognized; there is no support for
this driver in the kernel libraries; the driver is not supported; one or more de
pendency drivers for this driver are missing, not supported, or not included in
the kernel libraries.

Be sure all kernel libraries from HP-UX product filesets are installed, and that
the driver/subsystem names shown above are valid. Refer to the SAM logfile for
more information.

getkinfo: Unable to read the kernel file "/stand/vmunix".

Can you please advice?
Omar

[T G Manikandan]

check this link

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xb902a24d9abcd4118fef0090279cd0f9,00.html


Thanks

[T G Manikandan]

If the solution given by Patrick does not work
check this hpdoc

http://www1.itrc.hp.com/service/cki/search.do?category=c0&mode=id&searchString=TBRIXKBRC00003312&searchCrit=allwords&docType=Security&docType=Patch&docType=EngineerNotes&docType=BugReports&docType=Hardware&docType=ReferenceMaterials&docType=ThirdParty&search.x=46&search.y=11