Getting JetAdmin for HP-UX 11 and 11i

[Jonathan Caplette_1]

Hi guys,

I tried to install a JetDirect printer with SAM, and I got this error: "/opt/hpnpl/admin/hppi or /opt/hpnp/admin/jadmin not found..." I presume that is because JetAdmin is not installed on that machine... I tried to find it on the HP website but can't find it...

Do anyone have the link were I can get it for HP-UX 11 and 11i???

Thanks
Jonathan

[Sachin Patel · Accepted solution]

I don't know where did I found it long time ago, but give me your email address and I can send you one. I have saved it.

It is 6.9mb depot file.

Thanks
Sachin
patelsa70@hotmail.com

[Michael Steele_2]

Get webjetadmin. Latest and greatest.

http://www.hp.com/cposupport/networking/support_doc/bpj06765.html#P1_71

If problems with above link, try:

http://www.hp.com/cposupport/networking/support_doc/bpj06765.html#P1_54

[Steve Steel]

Hi

http://www.hp.com/cposupport/networking/support_doc/bpj06765.html#P1_54


The jetadmin is obsolete but hppi works fine.

Do not add network printers with sam but use the program supplied from the command line.

hppi

****************************************************************
*****] ****
**** ] **** JetDirect Printer Installer for UNIX
**** ]]]]] ]]]]] **** Version E.10.18
**** ] ] ] ] ****
**** ] ] ]]]]] **** M A I N M E N U
***** ] ****
****** ] **** User: (root) OS: (HP-UX B.10.20)
I N V E N T
****************************************************************

1) Spooler Administration (super-user only)


2) JetDirect Configuration (super-user only)
- TCP/IP configurable parameters

3) Diagnostics:
- diagnose printing problem


Steve Steel

Boldly Going Nowhere

[Jonathan Caplette_1]

Hi Sachin
My E-mail is

jonathan.caplette@itc.alstom.com

Thanks!

[Pete Randall]

Jonathan,

http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp%3Flocale%3Den_US%26prodTypeId%3D18972%26prodSubCatId%3D28674


Pete

[Jonathan Caplette_1]

Thank you all!!!

I've downloaded it...

[Bill Hassell]

One additional note: You don't need to use SAM or jetadmin or hppi to add a printer that is already configured on the network. Just use the command: addqueue

addqueue is in /opt/hpnp/bin (old JetAdmin software) or /opt/hpnpl/bin (current software) and usage is very simple:

addqueue -h IP-or-hostname-of-printer -q local-printqueue-name

[Sachin Patel]

It is in the mail.