getty console console

[j773303]

The "getty console console" not running in the system, so when going to GSP mode, it's can't back to console mode. I try to re-fork "getty console console" daemon, BUT it is would be died after a few minutes. Does anyone has the experience how to fix this problem? Thanks.

Model: L3000
OS: 11.11

[Michael Tully · Accepted solution]

Try using another terminal it could be defective.
Also have a look at this posting.
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=121003

[Bill Hassell]

Did someone change the baud rate in the GSP, or /etc/gettydefs? This is never a good idea since three completely independent settings must all match to provide correct console operation. The terminal should be 9600 baud, 8bits, no parity and the GSP should match. The console entry in /etc/gettydefs must also match. If someone wants a faster terminal, do NOT use the console.

[Balakumar M]

Hi
Have a look at the link,

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=122452

try to restart with "init q"

-Bala