HPE Community
Operating System - HP-UX
1836372 Members
2336 Online
110100 Solutions
New Discussion

Re: Half/Full Duplex

 
Midrange Systems
Occasional Contributor

‎09-08-2000 07:08 AM

‎09-08-2000 07:08 AM

Half/Full Duplex

On HP-UX 10.20 I need to know whether the NIC is running in Full or Half Duplex.

With HP-UX 11 this is simply a case of: 'lanadmin -s #NMid', but I am having trouble finding an easy way to get this info with 10.20

Many thanks in advance.
0 Kudos
Reply
2 REPLIES 2
Rick Garland
Honored Contributor

‎09-08-2000 07:37 AM

‎09-08-2000 07:37 AM

Re: Half/Full Duplex

The same command will get the info you request.

'lanadmin -x lanX' where lanX is the lan card you are seeking info about.

Note that patches are required for this functionality. Depending on the driver will depend on the patches.
0 Kudos
Reply
Rick Garland
Honored Contributor

‎09-08-2000 07:43 AM

‎09-08-2000 07:43 AM

Re: Half/Full Duplex

Correction - make that the nmid number.

lanadmin -x

Can get this number from the lanscan command.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.