1844849 Members
2890 Online
110233 Solutions
New Discussion

HBA information

 
kelvin567
Occasional Advisor

HBA information

Hello ,
From ioscan output i got the following information

Class I H/W Path Driver S/W State H/W Type Description
=================================================================
fc 0 0/4/0/0 td CLAIMED INTERFACE HP Tachyon TL/TS Fibre Channel Mass Storage Adapter
/dev/td0
fc 1 1/10/0/0 td CLAIMED INTERFACE HP Tachyon TL/TS Fibre Channel Mass Storage Adapter
/dev/td1


Currently I have HP ux 11.0 installed
how to check whether this hba is supported by hp ux 11.11
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: HBA information

You need to find the product number.

Either look for a sticker on the card or run

# fcmsutil /dev/td1 vpd

Please read this too:

http://forums1.itrc.hp.com/service/forums/helptips.do?#33

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: HBA information

Hm, I thought you're asking for 11.23 support, right?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Geoff Wild
Honored Contributor

Re: HBA information

Another command to use is:

fcmsutil /dev/td0

Check release notes for supported hardware:

http://docs.hp.com/en/5992-2331/5992-2331.pdf


Rgds...Geoff
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.