!!! Help!help !! lan2 failed and recovered and failed and ....

[Quan_sheng-liu Quan_she]

I am using HP9000 serial K380.

The software version is:
HP-UX scp1 B.10.20 A 9000/800 1899689431 two-user license

I have two host and configured it to a cluster.
Every host have 3 lancard. The card type is HP-PB 10/100baseT.

In my MC config, I configured the lan0 and lan1 to HEARTBEAT. And the lan2 is a
standby (backup) card.


The problem is:

Every host's system log file
/var/adm/syslog/syslog.log is loged like this all over the time:


Apr 12 14:04:53 scp1 cmcld: lan2 failed
Apr 12 14:04:55 scp1 cmcld: lan2 recovered
Apr 12 14:05:11 scp1 cmcld: lan2 failed
Apr 12 14:05:15 scp1 cmcld: lan2 recovered
Apr 12 14:05:31 scp1 cmcld: lan2 failed
Apr 12 14:05:33 scp1 cmcld: lan2 recovered
Apr 12 14:05:49 scp1 cmcld: lan2 failed
Apr 12 14:05:53 scp1 cmcld: lan2 recovered
Apr 12 14:06:10 scp1 cmcld: lan2 failed
Apr 12 14:06:12 scp1 cmcld: lan2 recovered



What shall I do ??
Many thanks.

[Mitch Wolf]

Make sure no ip is assigned to lan2 in MC config file and lan2 is not defined
in netconf file. Do lanscan verify that lan2 is down.
run cmviewcl -v and all lans should show as being up.


Mitch