How do I configure my modem as dial in?

[Bal Biyo]

Hi,

How do I configure my modem as dial in? We will use this to administer and monitor our HP 9000 remotely. Thanks in advance.

[Christopher McCray_1]

execute /opt/pred/psaction
choose configuration options menu (4)
data transfer menu (2)
setup modem port (9)
It will scan current modem settings where you will ask if you want to keep these settings, where you will answer no to change callin enabled from [n] to [y], if necessary

Hope this helps.

[Sridhar Bhaskarla]

The following document will explain it.

http://www.docs.hp.com/cgi-bin/onlinedocs.py?mpn=B2355-90698&service=hpux&path=../B2355-90698/00/00/27&title=Configuring%20HP-UX%20For%20Peripherals

-Sri

[Vito Sarducci]

Christopher,

I have a few questions about Dayton? What is your email address?

Vito

[Christopher McCray_1]

Vito,
mccrayc31@hotmail.com

[Ricardo Bassoi]

Which modem are you using ?
To configure a External USRobotics Modem is very simple:
If the modem has 8 dip swithes in the back so:
1 - DOWN
2 - UP
3 - UP
4 - DOWN
5 - UP
6 - UP
7 - DOWN
8 - DOWN

More informations about how to setup your HP machine go to:

http://www.docs.hp.com/cgi-bin/onlinedocs.py?mpn=B2355-90698&service=hpux&path=../B2355-90698/00/00/27&title=Configuring%20HP-UX%20For%20Peripherals

[Michael Tully]

Hi,

The linked document should assist you.

http://www.docs.hp.com/hpux/onlinedocs/B2355-90698/00/00/27-con.html

Also what system are you attempting to do
this on? The 'N' and 'L' class are quite
difficult to get this function working and
the 'K' class has a bad history of reliability
in the internal modem hanging which sometimes
not only requires a reboot to reset it but may
even need a power cycle.

Regards
Michael