How get WWN numbers for disks

[Etienne Holm]

I have several HP_UX servers with a large number of LUNS assignd from an EVA storage device.

These systems was build by a 3rd party and we have to reorg the LVM configs.

How can I get the WWN number for each disk and how do I then work it back to an device/HW path

[Oviwan]

hey

check scsimgr

here an example to get the wwid of each lun:
scsimgr -p get_attr all_lun -a device_file -a wwid

Regards

[Torsten.]

For the EVA you can download and install "evainfo".

[Etienne Holm]

The only options I seem to be able to do is:
Usage : scsimgr -o old_target_name -n new_target_name -H interface_hw_path

Is there a manager tool that I sould install to get the information or is there standard HP commands that will give this to me.

[Asif Sharif · Accepted solution]

Hi Holm,

You are probably looking for "evainfo".

Download and install it from the below link.

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3439051〈=en&cc=us&taskId=135&prodClassId=-1&prodTypeId=18964&prodSeriesId=471497

Regards,
Asif Sharif

[Kenan Erdey]

hi,

if you have autopath or spmgr, you can also get the info that you want.

Kenan.

[Etienne Holm]

None of these commands is available to me.

[Torsten.]

see

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=co-53627-1〈=en&cc=us&idx=0&mode=4&

[Etienne Holm]

I have got evaview and I can get the info I need.