how to configure redudancy network connection ?

[schinwari]

I need to configure an redundancy networking connetion .
is apa the only way or any other possibility ?

lanscan output:

Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
0/1/2/0 0x001A4BF24087 0 UP lan0 snap0 1 ETHER Yes 119
0/3/1/0/6/0 0x0014C29C3785 1 UP lan1 snap1 2 ETHER Yes 119
0/4/1/0/6/0 0x0016353E14C8 2 UP lan2 snap2 3 ETHER Yes 119

[Steven E. Protter]

Shalom,

Unlike Linux, redundant network connection does not ship with the OS.

You need to purchase Auto Port Aggregation, APA and then configure it. Maybe you have it as part of your OS, if you purchased mission critical.

http://docs.hp.com/en/J4240-90046/ch03.html

http://docs.hp.com/en/J4240-90041/ch03s01.html

SEP

[Viktor Balogh]

>is apa the only way or any other possibility ?

No, you can also get network redundancy with ServiceGuard. But if it's only the network part you want to be redundant, go with APA as it is much cheaper. (But check if your HP-UX Operating Environment includes Serviceguard.)