How to identify Npar

[Dhruva Raj]

Hi All,

I have a Rx8640 machine running 4 vpars (under 1 npar). Now I am in a need to identify the npar which will be one among 4 vpars. Is there a command to identify this?

Please help me soon.

Regards,
Druva

[Uday_S_Ankolekar]

You should be able to do it from mp console
cm >cp

-USA

[Shibin_2]

If all vPar runs from one partition, you can check from OS side using the parstatus command.

# parstatus -w

[gb karki]

Dhruva,

If you have 4 vpars under one npar.
Always nPAR is first vPAR.
whenever we are creating the npar with one cell board that time cell board will be use as a core cell.
so with help of parstatus and vparstatus you can easily find the core cell and where is used that cell board.

[Richard Hepworth]

Dhruva,

If you are looking to find which path your vpar monitor booted from (nPar boot disk) you can connect to the MP, jump on the console, use ctrl-A to switch to the MON> prompt and type 'bootpath'.

regards,

Richard