how to install ignite software

[KAT_5]

how can we install ignite software on hpux b.11.0. Where can find this software ( cd disk ).

What is command switch is necessary to make reliable recovery tape

[Michael Tully]

The software can be found on the application CD disk set. Depending on the age you may wish to get a later version. (recommended)

The best way to create an ignite image:
# /opt/ignite/bin/make_tape_recovery -x inc_entire=vg00 -I -v -a /dev/rmt/0mn (assuming this is your tape drive and making sure you use a non-rewind device)

[KapilRaj]

You should get ignite from application cds. Install it using swinstall / sam.

Search the forum with ignite and you will get to know many things

Regds,

Kaps

[KAT_5]

thanks , can we find this software in ECU disks

[Robert-Jan Goossens]

Hi,

I don't know what ECU disks are, it should be on one of the application software cdrom's. If youhave a fast internet connection you can download the software from below link.

http://www.software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=IGNITEUXB

Hope this helps,
Robert-Jan

[Wodisch]

Hi,

do you only ask for tools like "make_tape_recovery" or the whole remote installation server, too?
Get it form software.hp.com, use "swinstall" to install the product, then start the server's GUI from an X-Windows session using "ignite" and follow the instructions on popup window.
You'll have to be "root" to be permitted to install the HP-UX core-CDs onto your local Ignite/UX server's disk...

FWIW,
Wodisch

[Thierry Poels_1]

hi,

you would better download it from the HP website. The CD's contain older versions. There was an 5.x version with issues for HPUX 11.00.

Ignite version 5.3 is available on the website and is working on HPUX 11.00.

http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=IGNITEUXB


good luck,
Thierry Poels.

[Sanjiv Sharma_1]

Hi Ali,

It is recommended that you use the Ignite UX from the website:
http://www.software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=IGNITEUXB

From time to time, latest version of Ignite UX is freely awailable at
http://software.hp.com

The earlier version of Ignite UX had some issues which has been fixed in the latest version.

Command to install
# swinstall -s /depot/
/depot id the directory in which you have keep the Ignite UX software.

Command to make the ignite ux tape:
# make_tape_recovery -a /dev/rmt/0mn -x inc_entire=vg00 -Iv

[Sanjay_6]

Try this link for all Ignite UX faq and docs.

http://www.software.hp.com/products/IUX/index.html

Hope this helps.

Regds

[Bharat Katkar]

Go thr' this guide .. it covers almost everything of Ignite UX Administration.

http://docs.hp.com/cgi-bin/onlinedocs.py?mpn=B2355-90834&service=hpux&path=00/00/20&title=Ignite-UX%20Administration%20Guide,%20Edition%2015