How to recover VM via ignite-ux

[nice_nidhi]

I have a server  "HP-UX" on which I have a virtual machine "VGUEST1"

 
I have made "HP-UX" an ignite server and will be deploying customer image on server virtual server VGUEST1  via ignite

On "HP-UX" image is accessible via a nfs mount at below location
 
172.30.4.221:/vol/customer/PLATON
                   262144000 249776416 12367584   95% /vol/customer/PLATON
HP-UX:/ >
 
HP-UX:/vol/customer/PLATON/temp >ls -lrt
total 9615560
drwxr-xr-x   2 3113       smbnull       4096 Oct 19 13:01 upload
drwxr-xr-x   2 root       root          4096 Nov 18 12:34 hmcbackup
drwxr-xr-x   4 root       root          4096 Dec  2 06:26 ML
drwxr-xr-x   2 root       root          4096 Jan  9 12:43 mksysbbackup
drwxr-xr-x   2 root       root          4096 Feb  9 12:10 script
drwxr-xr-x   2 root       root          4096 Mar  8 16:34 hmc
drwxr-xr-x   3 3113       smbnull       4096 Mar  9 15:05 vco
-rw-r--r--   1 3113       smbnull    4913478018 Mar 12 18:56 2012-02-26,00:30           ...............................................IMAGE
HP-UX:/vol/customer/PLATON/temp >
 
I have to deploy this image on the virtual machine.I am getting the below error

Console is on Serial COM1
Booting kernel...

Disabling 8259s

Memory Class Setup
-------------------------------------------------------------------------
Class     Physmem              Lockmem              Swapmem
-------------------------------------------------------------------------
System :  4090 MB              4090 MB              4090 MB
Kernel :  4090 MB              4090 MB              4090 MB
User   :  3100 MB              2700 MB              2710 MB
-------------------------------------------------------------------------

Loaded ACPI revision 2.0 tables.
NOTICE: cachefs_link(): File system was registered at index 5.
NOTICE: nfs3_link(): File system was registered at index 8.
NOTICE: mod_fs_reg: Cannot retrieve configured loading phase from KRS for module: cifs. Setting to load at INIT

gio: Error configuring root device using EFI hw paths

    System Console is on the Built-In Serial Interface
W

Please suggest why i m getting this error  also Kindly suggest Other than image file what all is required from the customer server to deploy the customer's image on the VGUEST1.What all configuration files are required.Also please share the procedure for same.