HP 28696A and DLT 8000 Library..

[Vijeesh CTK]

Hi,

I have asked help for the same thing some time back..

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x44c0cf38d6bdd5118ff10090279cd0f9,00.html

Now what i need is..

i am having HP-PB 28696A FWD SCSI Card..and DLT library is connected to this( Robotic Arm )..
In ioscan -fnCext_bus i can see the HP-PB card..
ext_bus 7 10/16/4 scsi3 CLAIMED INTERFACE HP 28696A - Wide SCSI ID=7
but not in ioscan -funCext_bus..( here all the drives are connected thru HSC card and I am using the drives for backup) Now i want to use the PB card for robotic arm..
In ioscan -kf i can see the robotic arm..
target 15 10/16/4.0 target CLAIMED DEVICE
unknown -1 10/16/4.0.0 UNCLAIMED UNKNOWN HP C7200-8000

here drivers like scsi3,spt,stape are included into the kernel..
Any help will be appreciated

TIA

Vijeesh CTK

[harry d brown jr]

Read this thread:

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x606b7e990647d4118fee0090279cd0f9,00.html

and check all of the drivers and the mc tool out.

live free or die
harry

[Michael Tully · Accepted solution]

Hi,

Also check out this document.

Cheers
~Michael~

[Celso Medina Kern]

Hi,

You have to bind driver spt in kernel manually,
editing /stand/system and adding the following line:
driver 10/16/4.0.0 spt

recompile the kernel:
10.20
-----
cd /stand; mk_kernel -s system
mv vmunix vmunix.backup; mv vmunix_test vmunix

11.X
----
above steps;
kmupdate

Reboot and your device will be /dev/rac/c?t?d?

Celso

[Vijeesh CTK]

Hi guys,

Thanks for the help.. IN DLT 8000 manual the addition of spt driver is there..

Vijeesh CTK