HPE Community
Operating System - HP-UX
1834299 Members
2035 Online
110066 Solutions
New Discussion

Re: HP Auto LUN Question

 
John E. Goetz
Frequent Advisor

‎04-27-2007 06:17 AM

‎04-27-2007 06:17 AM

HP Auto LUN Question

When using the HP Auto LUN Production to migrate LDEv's from RAID-1 to RAID-5, we get an error when attempting to migrate 'Command Devices'. The error we received indicates that the "Source Device is a Command Device - Migration Failed" is there any solution to resolve this issue?
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎04-27-2007 06:31 AM

‎04-27-2007 06:31 AM

Re: HP Auto LUN Question

Hi,

you are talking about XP array software?

The command device is not a LUN - so you cannot migrate the RAID level or measure performance on it.

The command device is what the name suggests - a device to receive and process commands.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.