HP-UX 10.20 and fibre support

[Jimmy Tom_1]

Got a bunch of k-class servers running HP-UX 10.20 and 10.10. Like to know if the servers will support fibre or would I need to upgrade to HP-UX 11x.

Thanks

[Bill McNAMARA_1]

HPUX 10.20 does support fibrechannel there is no problem.
In fact the initial fc release was 10.20 based in around 1996.

No problem.
Later,
Bill

[Iain F. Brown]

A new HSC card A6685A for K Series has been released which supports fabric login.

[Jimmy Tom_1]

However, I believe the A6685A card requires HP-UX 11x. Also, if I want the K serves to be in a fibre SAN, I would need to be on HP-UX 11x. Am I correct?

Thanks

[melvyn burnard]

The A6685A is supported under Hp-UX 11.x only, not 10.x
Ther emay be a release for 10.20 in the future, but not guaranteed, so don't bank on it ;-}