HP-UX 10.20

[Jake_8]

are there any late model servers that still support HP-UX 10.20 ?

[James R. Ferguson · Accepted solution]

Hi Jake:

As I recall, the Kx80 was the last model that supported 10.20 adn that's no longer manufactured. In fact, the life of the K-series was extended with the x80 to accomodate customers who needed upgraded hardware but couldn't move to 11.0

Remember, support for 10.20 officially ended June 30, 2003.

Regards!

...JRF...

[Victor BERRIDGE]

Hi,
The DXXX and the KXXX are the only models to my knowledge to run 10.20 (the last D was D280/D380)


All the best
Victor

[H.Merijn Brand (procura]

D390 (not D380)

d3 HP-UX 10.20/32 U 9000/800/D390 PA8000/240 pa-2.0 512 Mb

And though the D series has some issues with hardware not being compatable or supported inside the D series architecture, it might even outperform some of the K-series for HP-UX 10.20

Our D390 is still alive, but our K-series is long dead and burried

Enjoy, Have FUNE! H.Merijn

[Jake_8]

Thanks.

[Scot Bean]

Any model server that can support a 32-bit mode should support 10.20.

Most servers in the last 5 years are 64-bit only, and therefore cannot.

Interesting note: most late-model HPUX workstations DO support 10.20, if you want to switch to something small but new.

Note also that SW updates for 10.20 ceased as of Dec2001.