HP-UX 11.0 - 32 bits or 64 bits

[ISHS]

Hi All,

Is HP-UX 11.0 has 32 bits or 64 bits OS version?

If yes, how to check it is 32 bits or 64 bits.

Thanks

Wendy

[Patrick Wallek · Accepted solution]

HP-UX 11.0 can be either 32 or 64 bit depending on the machine it is installed on.

If you have 11.0 installed on a machine do a:

# getconf KERNEL_BITS

If it returns 32, then you are running 32-bit HP-UX. If it returns 64, then you are running 64-bit HP-UX.

[T G Manikandan]

#getconf KERNEL_BITS

ALso you can use

SAM--->performance monitor--->system properties.

There you can find the kernel width support.


Thanks

[Michael Tully]

You should check which OS can be run on what hardware. Check this link:

http://devresource.hp.com/STK/serversupport.html

[H.Merijn Brand (procura]

https://www.beepz.com/personal/merijn/#FAQ will show you all commands at once

FWIW If you plan to install HP-UX on a D series, note that not all hardware will work with a 64bit kernel. e.g. there is NO working X.25 hardware available for HP-UX 11.00 on a D series.