HP-UX 11.00 for B Series

[Edward Baskett]

I'm getting conflicting info with regard to loading HP-UX 11.00 on a B132L +
(HP 9000)workstation. The info I'm getting is:
1. There may be a patch.
2. There is a 32bit version of the OS CDROM.

Any support is greatly appreciated.

Thanks!

[Chris Campbell_10]

As far as I know, 11.0 workstation ACE 11/99 runs on all B-Class workstations.
I have a B160L (very similar hardware) and I'm running 11.0 just fine. Here...
check this out:
http://www.hp.com/visualize/products/unix/os/updatematrix.html

Looks like you're good to go.



Chris

[Dave Wherry_1]

UX 11.0 does run on a B workstation. Both 64 bit and
32 bit versions are on the installation CD. The
installation routine should select the correct one for you, 32 bit for your
workstation.
Patches? You know it. It is HP (Highly Patched)after
all. May of '99 was the last UX 11.0 release. There
are hundreds of patches since then.

[Emil Velez]

B132+ is a 32 bit processor and we load 11.X on them all the time. I think what they are talking about is the original version of 11.00 may not have had the lan driver for network installs of 11.X that was fixed.