HP Ux 11i error

[Mohit Jairath]

Dear All,

I am installing an Avaya product on a HP UX11i platform,

I am getting the following errors on rebooting the system. I need to know how to disable these system messages.

System shutdown time has arrived
38000c6400e00000 a0e008101100d000 CC_PAT_ENCODED_FIELD_MAJOR_FWD_PROG
36000c6a00e00000 00000000000007ef CC_PAT_DATA_FIELD_MAJOR_FWD_PROG
3f000c5f00e00000 000000000000d000 CC_HEX_20_BIT_MAJ_FWD_PROG
3f000c5f00e00000 000000000000d400 CC_HEX_20_BIT_MAJ_FWD_PROG
38000c6400e00000 a0e008101100d000 CC_PAT_ENCODED_FIELD_MAJOR_FWD_PROG
36000c6a00e00000 00000000000004cf CC_PAT_DATA_FIELD_MAJOR_FWD_PROG
0300109100e00000 0000000000000000 CC_PROCS_ENTRY_OUT
0400008100e00000 0000000000000000 CC_IO_DISCOVERY_START
0400008600e00000 000000ffff00ff83 CC_IO_LBA_DISCOVERED
0400008600e00000 000000ffff02ff83 CC_IO_LBA_DISCOVERED
0400008600e00000 000000ffff03ff83 CC_IO_LBA_DISCOVERED
0400008600e00000 000000ffff04ff83 CC_IO_LBA_DISCOVERED
0400008700e00000 000000ffff00ff83 CC_IO_LBA_INIT
0400008700e00000 000000ffff02ff83 CC_IO_LBA_INIT
0400008700e00000 000000ffff03ff83 CC_IO_LBA_INIT
0400008700e00000 000000ffff04ff83 CC_IO_LBA_INIT


The error string is a long one so am putting a snapshot here.

Thanks and Regards,
Mohit Jairath
Avaya GlobalConnect , India
mohit.jairath@avayaglobalconnect.com

[Steven E. Protter]

Shalom,

I don't see anything definitive. Seems there is something going on with cpu0

I would suggest if the system boots, running dmesg and mstm/cstm or xstm and test the hardware.

SEP

[Torsten.]

Hi,

these are the selftest logs.
What system you are on?
Just in case this is a workstation, you can use a graphics console instead of a serial.

[Mohit Jairath]

its a HP C8000 with a 4GB RAM and 146GB HDD.

I understand these are system self tests.

1. I need to know how to disable them.
2. After disabling them, will it have any effect on the system ?

Thanks and Regards,
Mohit Jairath
Avaya GlobalConnect, India
mohit.jairath@avayaglobalconnect.com

[Torsten.]

What concole you are using?

Anyway, this is NOT an error!

(If you disable selftest, there are no selftest running - don't wonder if failures won't be detected)

[Mohit Jairath]

There's no console on site. My colleague is using a term emulation software on a laptop and the physical connection is via a serial to USB connector .

[Marcel Burggraeve]

Basically you have a console on site, in this case it's the laptop of your colleague.
The serial connection on such a system is the console port.
During a reboot you will always get those messages on the console port, like already suggested connect a monitor to the system if possible.
Together with an usb mouse and keyboard ( preferably HP, seen weird stuff with other brands on HP9000 workstations ) you can use it like a normal workstation.
( can't remember if a C8000 has onboard video though )
Another option is to turn on fastboot.
This will skip a huge part of selftests so isn't recommended but you will end up with less messages.
To turn off fastboot, interrupt the boot proces and at the prompt type : co fb on