HP-UX 11i Run state of F31F and F41F

[Edgar Arroyo]

Hi, is this OS supposed to run that busy? It used to run 11 at F01F and F11F...never went to 2 , 3 or even 4...

[miracle]

It is quite possible, however you may have a runaway process(es) hogging system CPU. Can you identify them through top or glance?

The display from LCD on a D or K server:
(HP-UX) Indicates the system is running. An F in the first and fourth digits indicates the system is running normally.
The x is updated every five seconds with the length of the run queue at that time (an instantaneous reading not an average). It indicates the number of processes. Loads higher than nine display as A.
The n indicates the number of processors (1 or 2).

[Edgar Arroyo]

Yes, I read it on a post earlier.. That's why I asked, because it just hit the 5 a couple of times...

[Edgar Arroyo]

JUST FYI...

After patching with GOLDQPK11i Dec. 2003 the run state went down to F01F!!!

Nice fix, I shall say.

[Joseph Loo]

hi edgar,

maybe u like to assign some points to all the posts u have missed for the last 2 weeks. "9 out of 66 assigned points" is not a very good track record to have.

regards.

[Edgar Arroyo]

I am after I figured it out. The ones before if they come up I will assing to them, I am still trying to get familiar with this fourm.