HP-UX command "truss"

[L van Mourik]

Is the UNIX command truss also available on HP-UX. This command exists on AIX5L & Dynix/PTX and can be very useful to trace program/environment errors

[Santosh Nair_1 · Accepted solution]

The HPUX equivalent of truss is tusc...which should be available from :

http://hpux.cs.utah.edu/hppd/hpux/Sysadmin/tusc-7.0/

Also, you can check out the following forum thread:

http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0x3d9fee3e323bd5118fef0090279cd0f9,00.html

-Santosh

[Bill McNAMARA_1]

The following links will give you a bit more too:

http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0x2599663ce855d511abcd0090277a778c,00.html

http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0xf6bd79bffde7d4118fef0090279cd0f9,00.html

http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0x8097e7e60861d511abcd0090277a778c,00.html

Later,
Bill

[linuxfan]

Hi,

On HP-UX 10.X you could use something called trace
http://hpux.ee.ualberta.ca/hppd/hpux/Sysadmin/trace-1.6/

On 11.X you could use tusc
http://hpux.ee.ualberta.ca/hppd/hpux/Sysadmin/tusc-7.0/

-HTH
Ramesh