HP UX machine not able to telnet

[senthil_3]

Hi,

I am not able to telnet My hp server from Windows based based machines it simply say connection closed by remote host. but the same HP server I am able to telnet through another HP server, can any one help over this prob.

[Michael Tully · Accepted solution]

Do you have any subnets disallowed in your /var/adm/inetd.sec file.

Have a look at the man page for 'inetd.sec'

[Steven Sim Kok Leong]

Hi,

Or do you have any installed tcpwrappers or host-based firewalls (e.g. ipfilter/9000) that is restricting accesses alike /var/adm/inetd.sec?

Hope this helps. Regards.

Steven Sim Kok Leong

[sven verhaegen]

just have alook in syslog on the HP system , telnetd logs it's messages in there , it is indeed true that there might be something like inetd.sec at work , but also have a look at the syslog it might just tell you why the HP refused the PC

[V. V. Ravi Kumar_1]

hi,

is it pinging from the windows host, if so reset the lan card and try telnet. if this is the case it is problem with patches/switch or duplex.

use lanadmin command to reset the card.

if it is not pinging then check default gateways for the both hp and windows machines.

regds