hpsmh a.3.0.1 on hpux 11iv2

[christian_derek]

Hi,

I uninstall my version of hpsmh 2.2.5 and installed version 3.0.1. Since then, when I access the hpsmh from the web. I'm missing a lot of options in the tools menu.

eg. Account for users and groups, disk and file systems, etc.

what I did wrong? how can I add them back?

Thansk,

[Stephan. · Accepted solution]

Hi,
according the installation Guide (http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01658585/c01658585.pdf) i could not find the requirement to remove the old version.

How did you remove it? (incl. dependencies?)

Check if all requirements are still available.

Account for users and groups: check usr/sbin/ugweb

Disk and filesystems: check /usr/sbin/fsweb

hth

[Raj D.]

Can you launch ugweb tool ,

Also Check :
# swlist -l product | grep -i user

( See if you have the 'users and group' sub product installed.)

Cheers,
Raj.

[christian_derek]

Hi,

yes I do have ugweb, but not fsweb. Here is the output of swlist ...

CDE B.11.23 HP-UX CDE User Interface
MailUtilities B.11.23 User mail agents and related tools
PHCO_31613 1.0 Cumulative changes to fuser(1M)
PHKL_36904 1.0 Kernel alias to user address space
SMAIL-IDENT B.11.23.1.001 identd(1m) User Identification protocol
SysMgmtHomepage A.3.0.1 HP-UX System Management Homepage - Web-Ba
sed User Interfaces
UserLicense B.11.23 HP-UX User License
UsersAndGroups B.11.23.01 HP-UX Accounts Management Tool

thanks,

[christian_derek]

Hi,

here is the error message, I'm getting trying to run ugweb ...

ugweb(1M) could not start the Accounts for Users and Groups web interface.
Ensure the following fileset(s) are installed and configured on the machine
to successfully start the Accounts for Users and Groups web interface.

UsersAndGroups.WEB
SysMgmtWeb.SysMgmtHomepage.SMH-RUN
SysMgmtWeb.SysMgmtHomepage.SMH-UILIB
SysMgmtWeb.SysMgmtHomepage.SMH-UILIB-COM


thanks,