HPUX 11.0 in D class

[Shahul]

Hi

Can I load HPUX 11.0 64/32 bit in D350 Server

Thanks in advance

Shahul

[Sanjay_6]

Hi Shahul,

HP D350 Supports only 32 Bit version of UX 11.0/11i.

Have a look at the thread below for the support matrix.

http://devresource.hp.com/STK/serversupport.html

Here is a link for more info.

http://devresource.hp.com/STK/hpux_faq.html

Hope this helps.

thanks

[Animesh Chakraborty]

Hi,
You can the see on your server itself.
#more /etc/.supported_bits.


Thanks
Animesh

[John Waller]

When you start the install from the 11.00 CD, the install procedure will detect on 32-bit system and load accordingly.

[Robert S. White]

Yes you can!

We run classes on D boxes and they all have HP-UX 11.0 loaded. Obviously they receive the 32 bit load.

[G.Kumar]

hi shahul,

In D class x70 onwards will support 11.00 64 bit.which is haing 8xxx processors .D350 will support 32 bit only.

GK

[Edward Alfert_2]

I have a D350 2 CPU system running hp-ux 11i 32bit. So not only does it support 11.0 but also 11i at 32bit.