HPUX 11iv2 - Hardware Support

[Matthew Pegge_1]

Can anyone point me in teh direction of hardware support matrix for the above. Need to see if I can run 11iv2 on a R390 and a L2000 server.

Cheers

[freddy_21]

check at page 3

http://h20338.www2.hp.com/hpux11i/downloads/hpux-11i-v2-overview-sept04-v19-050510.pdf


regards
freddy

[Matthew Pegge_1]

Is that a no then?

[freddy_21]

L2000 same as rp54xx

for R390 still searching ;p


best regards
freddy

[freddy_21 · Accepted solution]

found it ;p

for R390 only support 10.20 unsupported 11.00 and 11iv2


http://h20338.www2.hp.com/hpux11i/downloads/hpux-11i-v2-overview-sept04-v19-050510.pdf

thanks

freddy

[Matthew Pegge_1]

Thanks Freddy!

[doug hosking]

That doesn't sound right to me. An R390 will not run 11i v2 (no support for non-PCI cards) but it should work on 11.00 and 11.11. /usr/share/doc/11iRelNotes.txt on an 11.11 system I just checked says that the R390 *is* supported for both 32 and 64 bit, (subject to the usual caveats about having the right firmware, certain I/O cards not being supported for 64-bit kernels, etc.)
See also http://docs.hp.com/en/5991-2814/ch04s10.html#babcjdai . It is true that the R390 has long been discontinued, but that should not prevent HP-UX support of existing ones.

[Torsten.]

From the release notes 11.23 (11i v2) june 2006:

rp54x0 supported (L2000 included = rp5450)

http://docs.hp.com/en/5991-4794/ch02s03.html

R390 unsupported

http://docs.hp.com/en/5991-4794/ch02s04.html

[Torsten.]

But your R-Class is still supported with 11i v1 (11.11):

http://docs.hp.com/en/5990-7279/ch03s01.html