HPUX APA(lanmon) lanadmin displays question

[nenni]

Hi all,
I have installed couple of servers HPUX 11.11.
HP APA/lanmon is configured on gigabit interfaces. Strange thing that I have monitor that on some servers, lanadmin display speed 2Gb and on rest as 1Gb.
What I am expecting is that all of them to display 1Gb, as it is lanmon and only one interface must be working, other is only in case of failover.
Some info about the servers:
HP-UX B.11.11 U 9000/800 3580437668 unlimited-user license


# ioscan -funClan
Class I H/W Path Driver S/W State H/W Type Description
========================================================================
lan 0 0/1/2/0 iether CLAIMED INTERFACE HP AB352-60003 PCI/PCI-X 1000Base-T Dual-port Core
lan 1 0/1/2/1 iether CLAIMED INTERFACE HP AB352-60003 PCI/PCI-X 1000Base-T Dual-port Core
lan 2 0/4/1/0/4/0 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter
lan 3 0/4/1/0/4/1 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter
lan 4 0/4/1/0/6/0 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter
lan 5 0/4/1/0/6/1 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter
lan 6 0/5/1/0/4/0 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter
lan 7 0/5/1/0/4/1 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter
lan 8 0/5/1/0/6/0 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter
lan 9 0/5/1/0/6/1 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter

#lanscan -q
0
1
3
4
5
7
8
9
900 2 6
901
902
903
904

# lanadmin -x speed 2
Speed = 1000 Full-Duplex.
Autonegotiation = On.

# lanadmin -x speed 6
Speed = 1000 Full-Duplex.
Autonegotiation = On.

echo "lan ppa 900 display quit" |lanadmin
PPA Number = 900
Description = lan900 Hewlett-Packard LinkAggregate Interface
Type (value) = ethernet-csmacd(6)
MTU Size = 1500
Speed = 2000000000
Station Address = 0x1a4bf51600
Administration Status (value) = up(1)
Operation Status (value) = up(1)
Last Change = 280

Issue is why it is display speed: 2000000000.
On other servers is 1000000000.


BR
Nikolay

[nenni]

Hi,
after discussion with HP support, they recommended installing patch PHNE_28778.
One of the fixes is:
6.lanadmin command shows the incorrect speed of LAN_MONITOR failover group PPA.


I see if I can give it try and post back.

BR
Nikolay