HPUX command help and suggestion

[Deepak Seth_1]

i have a host running hpux 11.0 with 1 HBA . It is zonned to 2 SP on clariion . Recently i swaped a port connecting the SP A on a switch . This mess up my hpux as it think the deives on the older switch port is dead . I totally forget the command to run on hpux host to fix it . please help .
Second thing , when i run the command how it will get my device path back so my VG can see it again . Or do i need to export the existing volume group and import a new path (i can see the new device path after connecting a different switch port) . What is best way to deal with these type of situations .

[SUDHAKAR_18]

Hi Deepak,

I hope Emc clarion storages attached to servers with SAN environment.powerpath is the software is running with servers to handle EMC storages.and you desturbed the env by changing the HBA cables .am I correct?

powermt display dev=all
powermt config
powermt save
these are powerpath commands.

Zoning is the imp part in SAN environment.which type of zoning do you have?