I have problems with installation HP-UX 11i V. 1

[alymarcor]

I have a server rp3410 with an raid controller 160 and I configured a raid 5 with 3 physical disk. I began an installation of the OS and the procedure is Normal. The system request me the 3 cds and when the system reboot and try to boot of controller first time it show error of SYSTEM CRASH and NO DUMP CONFIGURED. Se attach

I have firmware 44.20 and pdc revision 1

[Bharat Katkar]

Hi,
what i can make out from the attachment is that system has panicked for the want of drivers.
Kernel is not configured with the necessary drivers.

Hope that helps.
Regards,

[Ashwani Kashyap]

from the attachment it seems that you don't have swap and dump device configured .

THe kernel doesn't have all the drivers necessary .

Secondly , you configured RAID5 , while the root,boot and swap logical volumes need to be contiguous

[alymarcor]

Can you help more? How can I load additional drivers for Kernel? The System isn't installed yet.

[Bharat Katkar]

Hi,
Please have a look at the doc below.

http://docs.hp.com/hpux/onlinedocs/5187-2239/5187-2239.html

That should help.
All the best.
Regards,