ignite backup

[sharan007]

Hi,

Can you pls tell me how to take ignite backup for the B2600 and B180L station.

Thanks

[Patrick Wallek]

The same way you do for other systems.

If you are backing up to tape you use the make_tape_recovery command.

If you are backing up to an Ignite server you use the make_net_recovery command.

[Bill Hassell]

I would start with the version of HP-UX you are using. If it is recent (11-something), you use the make_tape_recovery command. Like every command in HP-UX, there is a man page to help but you should also download and print the Ignite manual:

http://docs.hp.com/en/5992-3336/5992-3336.pdf

A getting-started command line would be:

make_tape_recovery -I -v -x inc_entire=vg00 -a /dev/rmt/0mn

where 0mn is changed to match your tape drive.