ignite image on HP-UX 11.23

[HCL Ash]

i am getting error while taking the ignite .

017A499BD01/recovery/2009-12-16,10:49/system_cfg vg00
save_config: Error - cannot determine lv "/dev/vg00/lvol2" usage via fsty

this is primary swap space

[Pete Randall]

It might be helpful to know the hardware involved and the command that was actually used. All I can tell you at this point is that there is no such "fsty" command on my 11.11 system.


Pete

[sujit kumar singh]

hi

please give O./p of /etc/fsatb and
lvlnboot -v

regards
sujit

[HCL Ash]

Boot Definitions for Volume Group /dev/vg00:
Physical Volumes belonging in Root Volume Group:
/dev/dsk/c1t1d0s2 (0/1/1/0.0.0.1.0) -- Boot Disk
Boot: lvol1 on: /dev/dsk/c1t1d0s2
Root: lvol3 on: /dev/dsk/c1t1d0s2
Swap: lvol2 on: /dev/dsk/c1t1d0s2
Dump: lvol2 on: /dev/dsk/c1t1d0s2, 0

/dev/vg00/lvol3 / vxfs delaylog 0 1
/dev/vg00/lvol1 /stand vxfs tranflush 0 1
/dev/vg00/lvol4 /tmp vxfs delaylog 0 2
/dev/vg00/lvol5 /home vxfs delaylog 0 2
/dev/vg00/lvol6 /opt vxfs delaylog 0 2
/dev/vg00/lvol7 /usr vxfs delaylog 0 2
/dev/vg00/lvol8 /var vxfs delaylog 0 2
# swap
/dev/vg00/lvol9 ... swap pri=0 0 0
# Auffang-Lvols
/dev/vg00/lvol10 /oracle vxfs delaylog 0 2
/dev/vg00/lvol11 /usr/sap vxfs delaylog 0 2

# TNG
/dev/vgwork/lvtng /usr/tng vxfs delaylog 0 2

# EXPORT ; aufgeloest 24.07.2009 G.Rau
# /dev/vgEXPORT/lvexport /usr/sap/EXPORT vxfs delaylog 0 2

# Q70
/dev/vgQ70/lvsap /usr/sap/Q70 vxfs delaylog 0 2
/dev/vgQ70/lvsapj /usr/sap/Q7J vxfs delaylog 0 2
/dev/vgQ70/lvmnt /sapmnt/Q70 vxfs delaylog 0 2
/dev/vgQ70/lvmntj /sapmnt/Q7J vxfs delaylog 0 2
/dev/vgQ70/lvora /oracle/Q70 vxfs delaylog 0 2
/dev/vgQ70/lvbatch /sapbatch/Q70 vxfs delaylog 0 2
/dev/vgQ70/lvstage /oracle/stage vxfs delaylog 0 2
/dev/vgQ70/lvologA /oracle/Q70/origlogA vxfs delaylog 0 2
/dev/vgQ70/lvologB /oracle/Q70/origlogB vxfs delaylog 0 2
/dev/vgQ70/lvmlogA /oracle/Q70/mirrlogA vxfs delaylog 0 2
/dev/vgQ70/lvmlogB /oracle/Q70/mirrlogB vxfs delaylog 0 2
/dev/vgQ70/lvarch /oracle/Q70/oraarch vxfs delaylog 0 2
# Auf Wunsch von SAP Update wird das put und das reorg als eigenes lvol
# gemountet ohne Links ! G.R. 18.01.2008
# /dev/vgQ70/lvreorg /oracle/Q70/reorgput vxfs delaylog 0 2
/dev/vgQ70/lvsapput /usr/sap/put vxfs delaylog 0 2
/dev/vgQ70/lvsapreorg /oracle/Q70/sapreorg vxfs delaylog 0 2
/dev/vgQ70data/lvdata1 /oracle/Q70/sapdata1 vxfs delaylog 0 2
/dev/vgQ70dat2/lvdata2 /oracle/Q70/sapdata2 vxfs delaylog 0 2

[Durvesh Mendhekar]

Hi,

which command you have used?

Regards,
Durvesh