IGNITE issue

[Terja]

Attempting to use ignite to build new workstations. using a pull instead of a
push. What I want to be able to do is to preset all configureation information,
on the ignite server (ip, hostname ....), and then just type in boot lan install
on the workstation and it will build the whole thing without any more
intreraction. HOwever what I am finding is that its forcing me to enter the
details like ip, subnet ... on the workstation. As I have 80 of these to do
in a short space of time, I really would like to simply if. I can do this for
jumpstart in a sun.

[Sanjay_6]

Hi,

Try these two links,

http://www.software.hp.com/products/IUX/docs/Customized_Install_Media_Paper.pdf

http://www.software.hp.com/products/IUX/docs/sysadm.html

Look at chapter 3 and appendix A in the 2nd link.

Hope this helps.

Regds