Ignite make_net_recovery failed

[Abhilash Krishnan]

When i am firing ignite backup through ignite server i am getting error

* /opt/ignite/bin/save_config -f /var/opt/ignite/recovery/client_mnt/0x0
017A4518968/recovery/2008-12-22,16:42/system_cfg vg00
lssf: /dev/dsk/c2t2d0s2: No such file or directory
save_config: Error - unknown disk type for /dev/dsk/c2t2d0s2, not SCSI or HPFL
idisk: Primary partition information not valid.
Run idisk with -r option to restore.
save_config: warning - An EFI partition is not found on the root disk /dev/rdsk/c2t2d0. It may be that this disk is not partitioned. See idisk message above.
awk: Cannot find or open file /var/tmp/swapinfo.tmp.
The source line number is 1.
awk: Cannot find or open file /var/tmp/swapinfo.tmp.
The source line number is 1.
save_config: Error - cannot determine primary swap size
ERROR: /opt/ignite/bin/save_config failed

======= 12/22/08 16:42:42 IST make_net_recovery completed unsuccessfully


pls suggest solution for the problem...

[Steven E. Protter]

Shalom,

Looks like your EFI configuration has been deleted or the disk it was on has been damaged.

Check disk/lvm configuration for problems and then prepare to re-run the job. I suspect the problem disk is already displayed in the error message.

sEP

[Abhilash Krishnan]

please find the attached LVM informations

[Tim Nelson]

Without knowing the version of ignite you are running may I suggest that you update to the latest and greatest rev.

99% of ignite issues are old and can be fixed with less effort by simply keeping up to date.

http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=IGNITEUXB

[sujit kumar singh]

hi,


seems to be an issue with the Client also.


I think when the save_config for the client is running it is not getting valid root disk and root VG and swap config for the client that u are trying to make an archive of.

Could u please check on the client #vgdisplay -v vg00
#strings /etc/lvmtab
#swapinfo -tam
#ioscan -fnCdisk
#swlist -l product -l bundle | grep -i ignite

also please give the O/p of the last command as run on the Ignite server.



It is sure that the updated version of Ignite solves many issues but this requires few checks on the Client also.

[Johnson Punniyalingam]

Hi Biju,

Best and perm solution would be by Installing the latest "Ignite version"

Thanks,
Johnson