1833823 Members
2308 Online
110063 Solutions
New Discussion

Ignite Server

 
Waqar Razi
Regular Advisor

Ignite Server

We use tape based ignite backups. We are planning to build ignite server to store network based ignite backups of servers.

Can some one please give me steps to accomplish that?

Any help in this regard is highly appreciated
8 REPLIES 8
Torsten.
Acclaimed Contributor

Re: Ignite Server

Locate the ignite admin guide at

http://docs.hp.com/en/IUX

to get step-by-step instructions.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Javed Khan_1
Valued Contributor

Re: Ignite Server

Md. Farhan A Azam
Trusted Contributor

Re: Ignite Server

Waqar Razi
Regular Advisor

Re: Ignite Server

How do we restore from an ignite backup stored on a network server?
Waqar Razi
Regular Advisor

Re: Ignite Server

The ignite backup has been taken using make_net_recovery command. Lets say we want to restore using that backup on network server, what are the steps to do that?
Torsten.
Acclaimed Contributor

Re: Ignite Server

Did you read the manual already?

All steps are there.

You need to boot the server via network directly from the ignite server. Note: there are different procedures for PA-RISC and Integrity servers.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Steven E. Protter
Exalted Contributor

Re: Ignite Server

Shalom,

This is an RTFM situation. Torsten has provided you the manual.

Ignite supports boot/recovery of IA-64 Itanium and PA-RISC systems.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
sujit kumar singh
Honored Contributor

Re: Ignite Server

Hi

Waqar,

now as suggested by Torsten and SEP you shall need to boot the client which you have taken the make_net_recovery backup from the network.

If that is a PARISC client , go to the BCH Main menu and give a command search

BCH MaIN MEnu> search

identify the LAN Path and corresponding "PX"
then do

BCH MAIN MENU>boot PX

FOR the IA Client scenario boot from teh EFI Shall with the LAN

Shell>lanboot select
select the LAN I/f that you want to boot through


Ignite Inatall Screen opens following that.

regards
sujit