HPE Community
Operating System - HP-UX
1850269 Members
3539 Online
104053 Solutions
New Discussion

ignite tape drive

 
KINGSLEY_1
Regular Advisor

‎05-07-2009 12:19 AM

‎05-07-2009 12:19 AM

ignite tape drive

Hi All!

Could somebody recommend a tape drive and a scsi cable that will enable me take ignite backup for rx7620, rx8620, rx2620, rp3440, rx 4640

Thanks

0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

‎05-07-2009 12:24 AM

‎05-07-2009 12:24 AM

Re: ignite tape drive

Start here:

http://www.hp.com/products1/storage/compatibility/tapebackup/IPF/13-9999-0005.html#matrixtable

A DDS drive may be enough - note: you will probably need a SCSI adapter too.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Michal Kapalka (mikap)
Honored Contributor

‎05-07-2009 12:29 AM

‎05-07-2009 12:29 AM

Re: ignite tape drive

Hi,

we are using Tape Array 5300 and Tape Drive DDS4, on the RP3440 is a different SCSI connector.

mikap
0 Kudos
Reply
Alexander Pino, Sr.
Frequent Advisor

‎05-08-2009 07:02 AM

‎05-08-2009 07:02 AM

Re: ignite tape drive

A DDS (3 or 4)"DAT" drive works like a charm!
It is, what it is!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.