Ignite UX help

[Chris Fadrowski]

I have a server without a tape drive. i installed IgniteUX 3.3.x because it can do what i heard called make_net_recovery. I am trying to figure out how to do this. Anyone have a procedure for this? and is there any web sites, white papers that have instructions?

any help is appreciated.

[harry d brown jr]

You should be able to do a "man make_net_recovery".


live free or die
harry

[James R. Ferguson]

Hi Chris:

For Ignite documentation, see:

http://www.software.hp.com/products/IUX/docs.html

Regards!

...JRF...

[Uday_S_Ankolekar]

Hi,

I would suggest you to get a local tape drive installed on the server.

Anyway, Here is the link for the make_net_recovery
http://forums.itrc.hp.com/cm/QuestionAnswer/1,11866,0xead7cf38d6bdd5118ff10090279cd0f9,00.html

Goodluck,
-USA..

[Sachin Patel]

Hi Chrish,
#man make_net_recovery

I am not in a mood to type long reply like wodish because I am not going to get even 1 point here.
assign point to 12 out of 73.

Sachin

[Patrick Wallek · Accepted solution]

Also have a look at the documentation in the file:

/opt/ignite/share/doc/makenetrec.txt

[Eileen Millen]

You would pick a system that you want to be an Ignite server. It should have a lot of space in /var/opt/ignite.
export your DISPLAY
ignite
this will lead you through the setup
You should setup a temporary IP address for
recovering with. You do not have to load in install CDs unless you want to do network installs.
I find it best to do the archive from the client.
make_net_archive -i -s Ignite_server
i is interactive

Eileen

[Sanjay_6]

Hi Chris,

Look at the thread below for more info on make_net_recovery

http://us-support.external.hp.com/cki/bin/doc.pl/sid=c56bed5e147d18e7a0/screen=ckiSearchResults?mode=id&searchString=KBAN00000003

And the Ignite UX FAQ

http://www.software.hp.com/products/IUX/iux_faq

Here is the Ignite UX Manual.

http://docs.hp.com/hpux/onlinedocs/B2355-90738/B2355-90738.html

hope this helps.

thanks