Ignite-UX server problem

[Igor Sovin]

Hi there!

I have a question about Ignite-UX product.
Recently I have configured an Ignite-UX server, but I dont know how to add new clients. Clients are IPF. In PDF doc there is a chapter describing how to do that, so it tells to boot client first then client would be available on Ignite server.
Every time I try to boot an IPF server via Ignite-Ux, remote host goes down, begin to boot and stops at step where I must choose a language, then it tries to boot from Ignite server and cant do that.
I get the following: cant access /var/opt/ignite/clients and
cant mkdir /var/opt/ignite/clients
though that dir is exported by nfs with the permissions described in Ignite-UX PDF and nfs server/client running on both Ignite server and client.
How can I add new clients to my Ignite-UX from server, so that I wouldnt have to go another building to remote client?

Igor.

[Alzhy · Accepted solution]

Igor,
What version of Ignite-UX are you running? If it is 5.3.35, you should'nt have any problem at all...

[Bernhard Mueller]

Igor,

I had a very very similar problem on PA-RISC and tried all sort of things and still could not find out why it would not work. The thing that did help was swremove the complete Ignite software and re-install.

If you do not have it, download IUX 5.3.35 as Nelson suggests.

Regards,
Bernhard

[Igor Posatskoff]

Thanx for help
I've downloaded Ignite-UX 5.3.35, my previous version of Ignite-UX was 5.0.33.
But on the Ignite-UX 5.3.5 download page there were description of some required pax patches. Where to get them? And where can I get documentation on version 5.3.35?

[Bernhard Mueller]

For IPF machines (HP-UX 11.23) I think there is no pax patch.

For HP-UX 11.x go to the patch database under "Maintenance and Support"

Regards
Bernhard

[Bernhard Mueller]

Igor,

check this:

http://www.software.hp.com/products/IUX/whatsnew.html

you might have a problem anyway.

Regards,
Bernhard