ignite-ux

[hari prasad_4]

hi all,

can anyone tell me what are steps involved in installation and configuring ignit-ux in hpux 11i and how to take golden image of a server.

thanks in advance

[Albert_31]

Hello Hari,

The one-stop IGNITE-UX documentation, you will find good documents to help you use the product and understand its potential and limitations

http://www.docs.hp.com/en/IUX/infolib.html

regards

Albert

[Mustafa Gulercan]

here is the link for Installing and Configuring an Ignite-UX Server;

http://docs.hp.com/en/B2355-90970/ch02s02.html

[Chauhan Amit]

Check the Link for detailed step-by-step procedure:

http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=1012456

Hope this helps.

-Amit

[D Block 2]

step 1. configuire an hp-ux server to be an "Ignite Server".
step 2. on the "ignite server" perform a make_tape_recovery for this one server.
step 3. create and define new "clients" using the "ignite server" (run the X-interface GUI to create clients.
step 4. install the ignite software on the Client servers by using the "Ignite Server" GUI.
last. create cron entry on Client server to run the new "make_net_recovery" program which copies the client system config information back to the "ignite server".

best of luck

[hari prasad_4]

thanks all for your replies

[hari prasad_4]

.