1833986 Members
2369 Online
110063 Solutions
New Discussion

Re: ignite

 
SOLVED
Go to solution
Ales Walach
New Member

ignite

Why does not ignite work? When I run ignite from console command:
make_tape_recovery -B /ora04/obnova/ignite.tst
Error massages are displayed:

* Creating The Tape Archive
lifcp: Cannot create SYSCMDS ; no space on the LIF volume
make_medialif: error - lifcp SYSCMDS failed, probable insufficient size for /ora04/obnova/ignite.tst
ERROR: System Error, /opt/ignite/bin/make_medialif failed creating boot LIF
file.
ERROR: Failed to generate LIF on tape .

There is about 34 GB free space on the target volume.
awalach
4 REPLIES 4
James R. Ferguson
Acclaimed Contributor
Solution

Re: ignite

Hi Ales:

Ignite version B.3.7.95 has a known problem and generates the error you are encountering. Patch PHSS_27407 for HP-UX 11.0 or
PHSS_27406 for HP-UX 11.11 correct this problem.

Regards!

...JRF...
Ales Walach
New Member

Re: ignite

James,
tell me where can I find these patches
Thank You
awalach
Bill McNAMARA_1
Honored Contributor

Re: ignite

You can get patches here on the IT resource center: http://www4.itrc.hp.com/service/patch/mainPage.do

Later,
Bill
It works for me (tm)
James R. Ferguson
Acclaimed Contributor

Re: ignite

Hi (again) Ales:

Patches can be viewed and/or downloaded from the ITRC patch database:

http://www2.itrc.hp.com/service/patch/mainPage.do

Choose the patch appropriate for your OS version (11.0 or 11.11).

If yu are unfamilar with the Patch Database, this gives an excellent overview:

http://www2.itrc.hp.com/service/patch/wrap.do?pageKey=patch.html.patchDBUsageGuide

Regards!

...JRF...