Igniting a new server with Image from different server.

[Venkat_11]

Hi,

I have HPUX rp440 server running HPUX 11i and we are taking ignite backup of this server to ignite server and i have 2 new servers and i am just wondering what procedure i have to follow to build the new servers with existing server image.

Please let me know the steps i have to follow to Ignite the server.

Thanks and Regards
Venkat

[Torsten.]

Well, all depends on the type of the new servers ...

[Venkat_11]

There are also same model rp4440.

[Torsten.]

You may backup the existing system with ignite and restore this image (interactively) to your new servers.

During installation you can adjust server name, IP address, etc.

[James R. Ferguson]

Hi Venkat:

As noted, this works with similar hardware.

I suggest that you use a current version of Ignite, although keeping previous versions available for temporary re-installation has served me well when trying to squeeze the last use out of old hardware.

Build an Ignite tape with:

# /make_tape_recovery -x inc_entire=vg00 -I -v -a /dev/rmt/0mn

When you boot from this tape, you will be prompted for an installation. Choose an "Advanced Installation". Be sure to set:

> CLONING TO DIFFERENT HARDWARE? TRUE.
> IMPORT VOLUME GROUPS? FALSE.
> ALLOW USE OF OTHER DISKS? YES.

I prefer to configure the system parameters by choosing "ASK AT FIRST BOOT?" too.

Regards!

...JRF...

[Venkat_11]

I dont have tape drive and i want to do it over the lan.

Regards
Venkat

[Torsten.]

Have a look at "Golden images":

http://www.docs.hp.com/en/5992-3336/ch09.html

[Ramesh S]

Hi

Glden image is very much recommended.

Still, Since it is a similar model, you could also use make_net_recovery archives of similar other server also.

Best Regards,
Ramesh