Operating System - HP-UX
1847879 Members
2752 Online
104021 Solutions
New Discussion

incoming ping slow, telnet slow, rlogin times out

 
Ron Kunzi
Occasional Contributor

incoming ping slow, telnet slow, rlogin times out

Hi,

I have a problem with a J210XC. It doesn't have a good
history. Replaced the integrated network module awhile ago. Had the reseller replace the backplane on it. Got it back from reseller day before yesterday. Configured the same way the other five J210XC we received from them, but I am still not able to ping this host from another host. The ping seg no vary, but they will work then stop, then start again. Telnet will be slow or eventually time out. Rlogin will not work at all. NFS is working ok. I have NFS mounted volumes working.
What is strange is that outgoing pings, telnet work great. Any suggestions would be greatly appreciated.

Thanks.
4 REPLIES 4
Volker Borowski
Honored Contributor

Re: incoming ping slow, telnet slow, rlogin times out

Hi,
this sounds strange indeed.
Has this box a second NI ?
If it has only a single one,
check outbount telnet to another unixbox on the chargen port.

From wicked_box do:
telnet other_box_in_same_network chargen

From other_box_in_same_network do:
telnet wicked_box chargen

Chargen is a very simple deamon (need to be enabled in inetd.conf) and does not validate stuff like reverse lookup and so on.

If this both works, it has to be IP-config of the services, probably concerning authentication or nameservice.

If this works not, I would put some ? on hardware-related issues.

Volker
weller
Advisor

Re: incoming ping slow, telnet slow, rlogin times out

Apology for a simple question
, did you check the cables?
Printaporn_1
Esteemed Contributor

Re: incoming ping slow, telnet slow, rlogin times out

are you got any duplicate IP message from
#netfmt -t 50 -f /var/adm/nettl.LOG00

- does linkloop work ?
enjoy any little thing in my life
Ron Kunzi
Occasional Contributor

Re: incoming ping slow, telnet slow, rlogin times out

All who responded,

Thanks for all the suggestions, I have sent the workstation back to the reseller and requested a new (different) one.