Operating System - HP-UX
1820142 Members
3265 Online
109620 Solutions
New Discussion юеВ

Install Hp Ux with serial cable

 
SOLVED
Go to solution
Luca Gabrielli
Advisor

Install Hp Ux with serial cable

Hi
I have HP visualize c360.
I have to install hp ux.
I would like to use a serial cable to connect my notebook to the c360 to do so.

Is it possible?
What are the settings in Hyper Terminal?
Thank you
3 REPLIES 3
Torsten.
Acclaimed Contributor
Solution

Re: Install Hp Ux with serial cable

Default values are OK with a speed of 9600. Connect to the appropriate COM port and disconnect mouse, keyboard and monitor from the c360. Set the emulation (properties->settings) to vt100.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Steven E. Protter
Exalted Contributor

Re: Install Hp Ux with serial cable

Yes, you can do this.

Default settings and 9600 speed will work.

The behavior of the terminal session may be a little different than you'd expect from the console and you may have to play around with the stty settings to make it all work right.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
DCE
Honored Contributor

Re: Install Hp Ux with serial cable

Make sure you use a null modem cable for the correct pin out..........