install pci card A6150B in rp3410 (graphic)

[ibrahim_9]

dear all :
i installed a new A6150B graphic card in rp3410 hpux server on slot 1 .

and check the driver and the card its appear
as grph 3 device and its claimed .

my problem I can not see the x window in the monitor just yallow boxs as a terminal .

please any one can help me or there is any configuration i must do it on display option in the sam or to edit any line in /etc/inittab

[Steven E. Protter]

Just a checklist...

sam
kernel configuration
drivers

make sure the graph3 really is set to state IN

Do you have dtlogin.rc soft linked in /etc/rc3.d to a script in /sbin/init.d

??

Do you have /etc/rc.config.d/xfs

first variable set to 1 so the font server starts?

If not, change the variable to 1 and:

/sbin/init.d/xfs start

:-)

SEP

[Sanjay_6]

Hi Sara,

Maybe this link would help,

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000074740886

The itrc doc id is GRAPHKBRC00003225.

Hope this helps.

Regds

[Scot Bean]

Is CDE installed / running?

Mouse & keyboard connected?

Yellow boxes sounds like HP terminal emulation only.

[ibrahim_9]

yes its like terminal emulation
cde and mouse & keyboard is install ,
I try the procedure above but without any results .

[Scot Bean]

- See if X is really running:

"ps -ef | grep X11"

- Check the X error log:

"view /var/dt/Xerrors"

[ibrahim_9]

X is running and no error log I think my problem how to start cde in monitor becuse I
install graphic card later ,
after I installed OS .
please do you know the path I must change it .
thanks for every one

[David Bell_1]

Sara,

What is the value of "init" in your /etc/inittab?

view /etc/inittab

ex; init:3:initdefault:

Dave

[Scot Bean]

Do you have a fix yet?

The only other info I can find is this:
http://docs.fc.hp.com/hpux/onlinedocs/A6150-90001/A6150-90001.pdf

It says: do not install the USB card that came with this board. Did you?

[Farid Abizeid]

What was the fix ?

Thanks,
Farid

[ibrahim_9]

ok farid follow you find full description for problem and solution , I face this problem here in Jordan three times :

problem :
after install graphic card A6150 in hpux server and
sure the drivers configured .
you see in the screen just yellow boxes like terminal
and the cde (gui interface) can't start .

solution :
1- vi etc/dt/config/Xservers
2- remove the # sign before the
(( * Local
local@console /usr/bin/X11/X :0 ))
or add it if you can't find usually it be the last
line in the file .
3- restart the server .

[ibrahim_9]

problem :
after install graphic card A6150 in hpux server and
sure the drivers configured .
you see in the screen just yellow boxes like terminal
and the cde (gui interface) can't start .

solution :
1- vi etc/dt/config/Xservers
2- remove the # sign before the
(( * Local local@console /usr/bin/X11/X :0 ))
or add it if you can't find usually it be the last
line in the file .