HPE Community
Operating System - HP-UX
1833758 Members
2367 Online
110063 Solutions
New Discussion

Install TxSeries On HP 11.0

 
SOLVED
Go to solution
wang_6
New Member

‎02-10-2003 05:39 PM

‎02-10-2003 05:39 PM

Install TxSeries On HP 11.0

 
wydhp
0 Kudos
Reply
4 REPLIES 4
Sridhar Bhaskarla
Honored Contributor

‎02-10-2003 06:20 PM

‎02-10-2003 06:20 PM

Re: Install TxSeries On HP 11.0

Hi,

Encina is looking for DCE programming tools. Install them from App4 CD. Select both DCE programing & Admin + DCE Kernel Threads Support products from the Application CD 4.

-Sri
You may be disappointed if you fail, but you are doomed if you don't try
0 Kudos
Reply
wang_6
New Member

‎02-10-2003 06:35 PM

‎02-10-2003 06:35 PM

Re: Install TxSeries On HP 11.0

Thank you reply.
I had installed the DCE-Admin,DCE-ClientTool and KTS.
I found HP version is 11.0
but TxSeries version is 4.2 in the cdrom that displays "Architecture HP-UX_B.10.20_700/800".Whether the deferent version will have a problem or not?

Please tell me,
Thanks a lot.
wydhp
0 Kudos
Reply
Sridhar Bhaskarla
Honored Contributor

‎02-10-2003 06:47 PM

‎02-10-2003 06:47 PM

Solution

Re: Install TxSeries On HP 11.0

Yeah.. I overlooked it. It is looking for DCE 10.20 version. I believe you will need to get a 11.00 version of encina.

11.00 should run with 10.20 binaries. So you may want to install it forcibly by selecting the options "enforce_dependency erros" and "allow incompatible software"

But I suggest you to get 11.0 version of it.

-Sri
You may be disappointed if you fail, but you are doomed if you don't try
Reply
wang_6
New Member

‎02-10-2003 07:24 PM

‎02-10-2003 07:24 PM

Re: Install TxSeries On HP 11.0

Thank you very much
wydhp
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.