Installation Error

[donne007]

Hi
When I,m Installing HPUx 11.0 I get an Error
DMA time Out, SITE_STATUS_REG 0XDO
BUs Master Status REG 0x21
I suspected that this has something to do with the Physical memory, can Any One help how i could resolve it.
Thanks in ADvance

Asif

[Bill McNAMARA_1]

what hardware is connected..
I know printers that do DMA..

Later,
Bill

[Cheryl Griffin]

Look for patch s700_800 11.00 IDE/ATAPI cumulative patch PHKL_27224.
# swlist -l fileset -a state |grep 27224

One of the defects listed in this patch text matches these messages:
Under heavy CD-ROM load, various error messages would be written to syslog, such as "DMA timeout", "Ktimeout on a DMA
read", "Failed to set up DMA bus master reg", etc. Although there was no data corruption, the messages would be both annoying and possibly distressing.

Installing this patch should resolve the errors.
Cheryl

[donne007]

Thank U guys , I could Do it By Just removing and fixing up the RAM in the same Slot .. And the INstallation is Thru ..

Cheers
Asif