Operating System - HP-UX
1834642 Members
3354 Online
110069 Solutions
New Discussion

Integrity VM "T2767BC" installed but the basic vm commands donw work

 
prajbor
Occasional Advisor

Integrity VM "T2767BC" installed but the basic vm commands donw work

I have a rx3600 box. Its Base OE with HP 11.3iv installed.I want to install HPVM on this box. I just used
" # swlist | grep -i Integrity"
and got the below outout

T2767BC B.04.00 Integrity VM
VMGuestLib B.04.10 Integrity VM Guest Support Libraries

Does that mean that I have HPVM installed?
If so then why doesnt commands like hpvmcreate, hpvminfo work. It throws message that the command could not be found. Does it need any more configurations?
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: Integrity VM "T2767BC" installed but the basic vm commands donw work

The installation requires a reboot - did you do this?

Check if the commands are there

/opt/hpvm/bin

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
prajbor
Occasional Advisor

Re: Integrity VM "T2767BC" installed but the basic vm commands donw work

I havent reboot the machine. I havnt also installed HPVM. We purchased this box from HP and now plan to virtualize it. I had heard that 11.3i March09 comes with vitualization support. So ran the above mentioned command.

Following are the commands present

/opt/hpvm/bin
# ls
analyzesys os_bundles_list.conf secsetup
createvm p2vassist vm_fssagt
hpvmupgrade p2vcommon