IPF rx2600 Boot messages

[Arunvijai.S]

Hi All,

I am getting the following messages while booting rx2600 server.

===================Log======================
> System Memory = 2041 MB
loading section 0
............................................................... (complete)
loading section 1
............ (complete)
loading symbol table
loading System Directory(boot.sys) to MFS
....
Loading MFSFILES directory (bootfs) to MFS
...........
Launching /stand/vmunix
SIZE: Text:31812K + Data:6021K + BSS:29322K = Total:67156K

Console is on a Serial Device
Booting kernel...

fw_psm_init: Unknown Vendor Guid: 0x49152e77
fw_psm_init: Unknown Vendor Guid: 0x9e99cb9c
fw_psm_init: Unknown Vendor Guid: 0xf951938d
fw_psm_init: Unknown Vendor Guid: 0x7462660f
fw_psm_init: Unknown Vendor Guid: 0x21f1f53f
fw_psm_init: Unknown Vendor Guid: 0xe18541cd
HP-UX will call firmware in physical-addressing mode
GetTableType: Sig XSDT.
GetTableType: Sig FACP.
GetTableType: Sig SPCR.
GetTableType: Sig DBGP.
GetTableType: Sig APIC.
GetTableType: Sig SPMI.
GetTableType: Sig CPEP.
GetTableType: Sig SSDT.
GetTableType: Sig SSDT.
GetTableType: Sig SSDT.
GetTableType: Sig SSDT.
GetTableType: Sig SSDT.
GetTableType: Sig SSDT.
GetTableType: Sig SSDT.
GetTableType: Sig FACS.
GetTableType: Sig DSDT.
foundation_pdt(): parsing through section headers: size = 24 ptr= 0xE0000001029F7028
foundation_pdt(): section length = 3248
foundation_pdt(): pdt type matched
==== PSI_PDT_INFO: max 100, nbr 0 ====
foundation_pdt(): parsing through section headers: size = 24 ptr= 0xE0000001029F7028
foundation_pdt(): section length = 3248
foundation_pdt(): pdt type matched
buffer.Length =
PCATCompat + 0
PAL_DEBUG_FEATURE [CPU 0]: 0x0 not called, multi-dispersal
CPUID: arch 0x00, family 0x1f, model 0x00, rev 0x07, num 0x04

Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 2041 MB 2041 MB 2041 MB
Kernel : 2041 MB 2041 MB 2041 MB
User : 1685 MB 1467 MB 1473 MB
-------------------------------------------------------------------------

PAL_DEBUG_FEATURE [CPU 1]: 0x0 not called, multi-dispersal
=============================================

Is anything wrong with system setup ?

Thanks,
Arun

[Bharat Katkar]

Arun,
These are not normal messages. I don't see any of them on my IPF machine.
I doubt this is something related to kernel or may be your kernel is not able to find correct driver module's / kernel parameters for the System Hardware devices.

Rebuilding kernel with correct drivers and kernel parameters would be options but suggest to wait for more input's from other Guru's out here.

Regards,

ps. Did you got your Ignite problem resolved?

[Arunvijai.S]

Hi Bharat,

Yes, I solved the problem with the ignite server. FTP command was not working in the 11.23 SYSCMDS. That was the cause of the problem.

Thanks,
Arun