irdiag output

[Nagamani_1]

Hi,

This is noticed on a rp2470 server with Raid 4si card connected to 2100 disk subsystem with 18 x 4 disks

irdiag -i
dapter Hardware Path: 0/4/0/1



Device File: /dev/iop0

Product ID: 467

Firmware Version: U.01.06

Number of Logical Drives Configured: 1

Maximum Concurrent Commands Supported: 254

Maximum Targets Supported per Channel: 0

Number of Channels: 4

Flush Interval: 4

Rebuild Rate: 30

Dram Size (Mb): 128

Battery Pack: Connected

Battery Status: Charging Completed

Battery Temperature: Good

Battery Voltage: Good


The maximun number of targets per channel should show 16 instead of 0. Why is it so ?Functionally the disks are working fine.


regds
Nagamani

[Stefan Stechemesser]

Hi,

you're right. Normally it should show 16 targets. The only idea I have is that it could be an irdiag problem. Check for the latest Raid4Si Patches PHSS_27097 (11.0) or PHSS_27098 (11.i). Lates firmware U.01.06 is already installed on your card.

best regards

Stefan