ISL Revision A.00.38 OCT 26, 1994

[Donny Jekels]

After ignite'ing a A500 from a make_net_recovery image, the box stop at the ISL> prompt.

Booting...
Boot IO Dependent Code (IODC) revision 1


HARD Booted.

ISL Revision A.00.38 OCT 26, 1994

ISL booting hpux



ISL>

I tried entering hpux -is and it returns to the ISL> prmpt without any warnings notices.

Any ideas welcome.

[Michael Tully]

Hi Don,

Did the box actually compete the install, or was this the first attempt?

If you were trying to boot off an make_net_recovery image, what was your options?

boot> lan install.xx.xx.xx.xx ?

and you not supposed to use the ISL anyway.

have you tried to boot from the other end (from the igniter server?)

Cheers
Michael

[Donny Jekels]

the build went through complete successful.

the very last message is

Booting_From_Client_Disk: Begin

when I log into the GSP is get teh ISL> prompt, I then type hpux -is (for singel user mode) and the ISL> prompt comes right back.

[Pete Randall]

Donny,

At the ISL prompt, do "ls" to see if you even have hpux there.


Pete

[Donny Jekels]

ISL> ls


Utilities on this system are:

filename type start size created
====================================================
HPUX -12928 832 800 97/11/06 02:10:13

ISL>